Description
Aikon AK32PIN 4-in-1 35A v2 6S BLHeli_32 ESC
It’s finally happening!
One of the most anticipated 20×20 6S ESC from the creators of officially the most selling Aikon AK32 30×30 4in1 ESC!
As racers we are all striving shaving grams from our builds, With this 20×20 ESC from Aikon you will be able to shave some grams without worrying about reliability.
The Aikon AK32 4-in-1 35A 6S is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware.
What makes the AK32 worth your investment?
- BLHeli_32 code base
- Programmable PWM frequency of up to 48KHz
- Auto-timing for higher efficiency and reliability
- Analog Voltage/Current sensing
- Adjustable “Brake on Stop” force
- Improve direction change in Bidirectional mode
- One current sensor to measure the total amp draw and telemetry functions.
- ESC Telemetry (Voltage and RPMs and current)
- Configuring from FC using DShot commands
- Programmable sine modulation mode
- Programmable soft bidirectional mode
- Programmable autonomous periodic (every 32ms) telemetry mode
- Hardware noise filter on the signal input
AK32PIN 4-in-1 35A 6S specifications
Battery | 2-6s |
Constant Current | 35A |
Burst Current | 45A |
Mount Hole | 20*20mm |
Firmware | BLHeli32 |
MCU | STM32PINF0 |
Bootloader | Yes |
Weight( with/wire) | 10g |
Signal wire length | 100mm |
Battery wire length | 100mm |
Package Contents ::
1 x Aikon AK32PIN 4-in-1 35A 6S BLHeli_32 ESC
siam.hatlang (verified owner) –
This is an excellent ESC for any 20×20 5 inch or less. I use it on a Squirt v2 built where I paired with Aikon F7 Mini HD v3 FCs. They are robust and durable considering the abuse I put them through. They will also make excellent ESC for 6S 5inch as the current draw is lower with the increase in voltage so 35A (Total of 140A) is enough for a majority of 6S 5 inch.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal