Description
BLITZ F7 Stack (E55 4-IN-1 ESC)
The iFlight BLITZ F7 Stack features an F7 V1.2 Flight Controller and an E55 4-in-1 55A ESC. The V1.1 FC now has a new gyro, improved circuit design, better components, and lower noise level!
- (Jan 2024) FC Version updated to V1.2 / Gyro changed to from BMI270 to ICM42688.
FEATURES
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- BLITZ F7 V1.2 FC + E55 55A 4-in1 ESC
- FC indicator LEDs for visual debugging
- With LC filter
BUILT TIPS
- SBUS, CRSF, ELRS, IBUS, DSM ETC… can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
- Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
- F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
- F722 MCU has an inner inverter.
WIRING
- UART 3/4/5 for GPS or other sensors that require a serial port
- UART 1 for VTX HD / Analog
- UART 6 for ESC Telemetry
- UART 2 for a Receiver
SPECIFICATION:
BLITZ F722 V1.2 FLIGHT CONTROLLER
- Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
- Smartaudio / IRC Tramp VTX protocol supported
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- Motor outputs: 4x (SH1.0 connector)
- Flash: 32MB (Blackbox flash)
- I2C serial: SDA / SLA pads
- Dimensions: 36.5*35 mm
- OSD Chip: AT7456E
- Barometer: DPS310
- MCU: STM32 F722
- LED controller: Yes
- Beeper pad: Yes
- Gyro: ICM42688
- Weight: 7.8g
- BEC: 5V 2.5A / 9V 2A
- UARTS: 6
BLITZ E55 55A ESC
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Mounting Holes: 30.5×30.5mm/4mm
- Target: IFLIGHT_BLITZ_G2
- Supports 2-6S lipo input
- Current sensor: Yes
- Constant: 55 Amps
- Current rate: 200
- Burst: 65 Amps
- Weight: 15.3g
- MCU:G071
- BEC: No
PACKAGE INCLUDES:
- 1x iFlight BLITZ Stack – F7 V1.2 FC + E55 4-in-1 55A ESC
- 1x Wiring Harness for F7 FC
- 1x Silicone Grommet Set
What others are saying
There are no contributions yet.