Description

RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter –ELRS w/ AG01 Hall Gimbal

The RadioMaster TX16S Mark II Radio Transmitter is the latest in radio transmitter technology. This radio features AG01 CNC Hall Gimbals ,an Internal ELRS(SX1280) RF Module, OpenTX and EdgeTX compatibility, and 2.4GHz radio frequency with 16 Channels. This updated design includes an easily removable battery cover, raised and flat grips for better ergonomics, and improved S1/S2 knobs with center detents. The 4.3″ IPS color dispay provides easy programming with touch panel precison and the  brand new 3.5mm audio headphone jack and built-in dual speakers provide great audio options for pilots!

IS RADIOMASTER TX16s WPC ETA APPROVED ?

Yes,RADIOMASTER TX16S is approved by WPC,We can provide the ETA certificate to government officials if you have project for government,defence agencies.Contact us for ETA CERTIFICATE

THE BEST JUST GOT BETTER.

VIDEO: RadioMaster TX16S Mark II Radio Controller – ELRS | 4IN1

Features

• Improved internal circuitry and optimized power supply.
• New charge circuitry with integrated reverse-polarity protection.
• Optimized charge IC now allows up to 2.2A internal USB-C charge current.
• Rear-mounted audio jack provided headphone output.
• AG01 FULL CNC HALL GIMBAL pre installed.
• Optional high/low rear grips are included for improved ergonomics.
• Improved S1/S2 knobs with clear centre-detents.
• Improved LS/RS Sliders with smoother feel and better centre-detents.
• Redesigned battery cover for improved battery access.
• Retooled body shell with improved fit and finish.
• Trainer socket changed to standard TRS 3.5mm socket.
• Rear DIY Socket added for personalized mods.
• Improved internal plastics for better longevity.
• INTERNAL ELRS RF MODULE-250mW

Specifications

• Item: TX16S Mark II
• Size: 287x129x184mm
• Weight: 750g (without battery)
• Transmission frequency: 2.400GHz-2.480GHz
• Transmitter module: Internal ELRS (SX1280)
• Transmitting power: Internal ELRS : Max 250mw (transmitting power is adjustable)
• SD card: 256MB by default, 8GB maximum
• Antenna gain: 2db (transmit power adjustable)
• Working current: 400mA
• Working voltage: 6.6-8.4v DC
• Radio firmware: EdgeTX
• Module Firmware: ExpressLRS (ELRS)
• Channels: Up to 16 channels (depending on the receiver)
• Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
• Gimbal: AG01 FULL CNC HALL GIMBAL pre installed.
• Module Bay: JR compatible module bay
• Upgrade method: Supports USB-C online / SD card offline upgrade
• Color : Black
• Mode-2

Includes

• 1x RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter-Internal ELRS RF Module-250mW w/ AG01 FULL CNC HALL GIMBALS INSTALLED
• 1x 18650 BatteryTray (Battery Not Included)
• 1x Raised Grips (Set of 2)
• 1x Flat Grips (Set of 2)
• 1x TX16S Key Chain
• 1x Screen Protector
• 1x USB-C Cable

Support EdgeTX and OpenTX

EdgeTX is installed by default (Touch screen enabled).

* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.

ELRS Version

This TX16s MKII comes with Internal ELRS RF MODULE.We also have the same TX16S MKII radio with 4 in 1 Module you can buy from here.

Here are the tips for you to choose 4in1 or ELRS, reviews by OscarLiang

“If you can’t decide between ELRS and 4in1, Most people probably go for the ELRS version. It’s going to be the major RC protocol in the near future as it’s so powerful and affordable, with a wide range of tiny and inexpensive ELRS receivers available.

One reason to get the 4in1 is if you only want to use other protocols such as Frsky D8/D16, but these are kind of obsolete and slowly phasing out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1 as you don’t want to have another ELRS module onboard doing nothing. An external ELRS module might have the advantage of higher maximum output power of up to 1W. But honestly the internal module’s 250mW is plenty for FPV pilots, giving you miles of range in ideal conditions.

AG01 GIMBALS PRE INSTALLED

AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.

Flat & Raised Grips Included

Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.

Built-in dual speakers

External Module Bay

The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.

Easy Firmware Updates

Upgraded Design

• Retooled faceplate with improved fit and finish
• Improved S1/S2 knobs with center detents
• 4.3” IPS Color Display – The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.

• Improved LS/RS Sliders with smoother feel and better center detents.

• New 3.5mm Audio jack – Rear mounted audio jack minimizes RF interference from external modules and adds a headphone audio feature.
• Redesigned battery cover, easier to remove.
• Rear DIY Socket added for personalized mods.

Radio Overview