Kore Carrier Board & The Cube Orange+ (IMU V8) Combo

FEATURES AT-A-GLANCE

Up to 12-cell Lithium battery (50.4V)
140A continuous current with 280A surges
Power and signal for ESCs conveniently located in corners
12V navigation light power available at each cornerBuilt-in power distribution
Built-in voltage and current sense
Redundant power supplies for flight critical components
Payload connectors with resettable fuses for 5V, 12V, and direct battery power
Good power and error indicator lights
Built-in buzzer with volume control
Connectors for every function of Pixhawk Cube
Easily accessible PWM voltage level selector (3.3V or 5V)
Resistant to ground bounce on PWM signal
Connector-compatible with standard ProfiCNC carrier board
Connector ports for debugging IO and FMU processors

The Cube Orange+ (IMU V8)

Features

Faster H7 SOC with 1MB ram.
Upgraded triple redundant IMU sensors for extra redundancy.
Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.
Manufacturers can design their own carrier boards to suit their specific needs now and in the future.