Description

TATTU G-TECH 6000mAh 6S 150C 22.2V LIPO BATTERY-AS150 PLUG

The Tattu G-Tech 6000mAh 6S is a high-capacity power pack built for heavy-lift platforms like the Cinelifter X8, where sustained current draw and long run time matter more than minimum weight. Tattu’s automatic stacking technology packs a genuine 6000mAh into a single-cell design, giving this pack more usable capacity than comparably-sized packs of similar chemistry.

Every pack in the G-Tech line carries an embedded smart chip that automatically identifies the battery and communicates with a G-Tech Eco Smart Charger, streamlining charging and helping protect the pack over its lifetime. The pack still charges normally on any standard 6S-capable balance charger if a G-Tech charger isn’t available — you just won’t get the automatic identification and communication features.

With a true 150C continuous discharge rating and a heavy-duty AS150 connector built for sustained high-current loads, this pack is designed to power demanding cinematography and heavy-lift rigs reliably, flight after flight.

FEATURES:

• Embedded G-Tech chip enables automatic identification, communication, and smart charging when paired with a G-Tech Eco Smart Charger
• Also fully compatible with normal 6S balance chargers — no special charger required to charge this pack safely
• Stable automatic stacking technology delivers a genuine 6000mAh single-cell capacity, higher than comparable-size packs
• Rated for up to 2x the service life of comparable packs at the same discharge rating, per Tattu
• True 150C continuous discharge for sustained high-current draw on heavy-lift and cinelifter platforms
• AS150 discharge connector paired with 10AWG wire for high-current, low-loss power delivery
• G-Tech-7P balance/charge connector with a 75mm lead

SPECIFICATIONS:

• Brand: Tattu
• Series: G-Tech
• Model / SKU: TAA60006S15AS (Part #: TA-CNL-150C-6000-6S1P-AS150-GT)
• Minimum Capacity: 6000mAh
• Energy: 133.2Wh
• Nominal Voltage: 22.2V
• Configuration: 6S1P (6 cells)
• Continuous Discharge Rate: 150C
• Weight: 945g (±20g)
• Dimensions (L x W x H): 161 x 45 x 61mm
• Discharge Connector: AS150
• Discharge Wire: 10AWG, ~120mm lead
• Balance / Charge Connector: G-Tech-7P
• Balance Wire Length: 75mm
• Smart Charging: Embedded G-Tech chip for auto-identification and communication with G-Tech Eco Smart Chargers; also compatible with standard 6S balance chargers

PACKAGE CONTENTS:

• 1x Tattu G-Tech 6000mAh 6S 150C 22.2V LiPo Battery with AS150 plug

Best Use / Compatibility

Purpose-built for heavy-lift cinelifter platforms such as the Cinelifter X8 and similar large multirotors used for professional aerial cinematography, where high sustained current draw and long flight time in a single pack matter more than minimum weight. The AS150 connector and 10AWG wire are sized for the current these platforms demand.

Recommended charger: For full smart-charging functionality (automatic identification and communication), use a G-Tech compatible charger such as the Tattu TA1000, iMars D1000, or Gens ace iMars D300. A HOTA D6 Pro or any other charger capable of balance-charging 6S LiPo packs will also charge this pack normally as a standard 6S pack, just without the G-Tech chip’s automatic identification and communication features.

Charging & Safety Guidelines

• Always charge on a fireproof surface or in a LiPo-safe charging bag, and never leave a charging pack unattended
• Use a charger with 6S balance capability; a G-Tech compatible charger is recommended to make full use of this pack’s smart chip
• Do not discharge below 3.0V per cell or exceed the pack’s rated discharge current
• Store partially charged (storage voltage, ~3.8V/cell) if not flying within a few days
• Inspect the pack before every flight — do not fly or charge a puffed, punctured, or damaged pack
• Transport and store in a fireproof LiPo bag/case