Description
HUMMINGBIRD V4 AIO FLIGHT CONTROLLER EXPRESSLRS(ELRS) 2.4G WITH 25-400mW VTX
The NewBeeDrone HummingBird V4 AIO is a compact, high-performance 25x25mm flight controller built for micro racing and freestyle. It features an F4 processor, 12A 1S 4-in-1 BLHeli_S ESC, onboard ExpressLRS receiver, and a powerful 400mW VTX. With plug-and-play ease and factory tuning, it delivers smooth flights, low-latency control, and a strong video signal for both indoor and outdoor flying.
FEATURES:
- Factory-Tuned for Plug-And-Play Simplicity
- Integrated 12A 1S 4-in-1 BLHeli_S ESC
- Compact 25x25mm Mounting Pattern
- Built-In ExpressLRS 2.4GHz Receiver
- Powerful F4 Flight Controller
- All-In-One Design
- 400mW VTX
SPECIFICATIONS:
- MCU: STM32F411
- GYRO：BMI270
- VTX: 25mw for Racing/ 100mw and up to 400mw SmartMax temperature control with BeeTX 5.8Ghz Antenna
- ESC: 12A BLHeliS pre-flashed with Bluejay 0.19.2
- Target: O-H-10 48kHz
- ESC Connector: JST-1.0 3Pin
- OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
- Receiver: 2.4G Antenna with MHF3 connector
- Flight Controller Weight: 4.57g(Include antennas and battery connector)
- Flight Controller Size: Outer dimensions: 29x29x7.6mm
- Flight Controller Holes: 25.5×25.5mm
- Battery input: 1S Only
- Uart1: free
- Uart2: free
- Power Plug: NewBeeDrone NX69 Connector
PACKAGE CONTENTS:
- 1x NewBeeDrone HummingBird V4 AIO – F4 FC + 12A 1S 4-in-1 BLHeliS ESC + ELRS RX + 400mW VTX – 25×25
- 1x Hardware Kit
Notice: This product is a replacement part specifically designed for the Hummingbird V4 BNF drone. It is not intended for any DIY projects. Utilizing this product in DIY activities, including but not limited to integration with non-NewBeeDrone brand frames/motors or any soldering processes, will void the NewBeeDrone warranty. Any inadvertent damage to the flight controller resulting from such DIY activities will not be covered, and all associated costs will be the responsibility of the user.
SPI ELRS3.x receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.x or above version. You will need to update your remote controller ELRS to 3.x version because betaflight 4.5 will no longer support any lower version of 3.0)
Please read through the SPI base information if you have difficulty with binding
Hummingbird V4 Betaflight firmware:
Betaflight_HMBV4 2025.12 SPI Elrs 3.X
Betaflight_HMBV4 2025.12 SPI Elrs 4.X
Reviews
There are no reviews yet.