BAMBULAB PLA MARBLE WHITE–1 KG

Description

Bambu Lab PLA Marble White – 1 kg

Give your 3D prints the look of natural stone with Bambu Lab PLA Marble in White Marble (13103). Fine inorganic particles create a distinctive speckled finish, adding depth and texture to decorative models, sculptures, architectural displays and home accessories.

This 1 kg, 1.75 mm filament comes on a basic reusable spool with RFID for automatic filament identification and printing-parameter loading through a compatible Bambu Lab AMS.

Features

• Natural stone appearance: A white base with contrasting mineral-like speckles creates a marble-inspired finish.
• Decorative surface texture: Adds visual detail to display pieces, models, ornaments and sculptural prints.
• Reusable spool included: Supplied as 1 kg of filament with Bambu Lab’s basic reusable spool.
• RFID printing setup: Compatible Bambu Lab AMS systems read the embedded filament information and apply the matching parameters.
• AMS compatibility: Compatible with the Bambu Lab AMS series, including AMS lite.
• Consistent diameter: 1.75 mm filament with a tolerance of ±0.03 mm.

Printed application example. The white speckled portion demonstrates White Marble; other colours and printed models are not included.

Specifications

• Brand: Bambu Lab
• Material: PLA Marble
• Colour: White Marble (13103)
• Filament diameter: 1.75 ± 0.03 mm
• Net filament weight: 1 kg
• Supply format: Filament with basic reusable spool
• Density: 1.22 g/cm³
• Tensile strength (XY): 33 ± 4 MPa
• Bending strength (XY): 75 ± 5 MPa
• Bending modulus (XY): 2920 ± 180 MPa
• Impact strength (XY, unnotched): 24 ± 2.5 kJ/m²
• Heat deflection temperature: 56°C at 0.45 MPa
• Spool dimensions: 200 mm diameter × 67 mm width

Material properties are manufacturer laboratory measurements; results depend on printing settings, geometry and test conditions.

Recommended Printing & Storage Settings

• Nozzle temperature: 190–230°C
• Build plate temperature: 35–45°C with suitable glue, following the plate’s guidance
• Printing speed: Below 250 mm/s
• Part cooling: On
• Compatible nozzle diameters: 0.4, 0.6 and 0.8 mm
• Nozzle restriction: Do not use a 0.2 mm nozzle.
• Drying: 55°C for 8 hours when needed
• Storage: Keep sealed with desiccant; recommended humidity below 20% RH.

Package Contents

• 1 × Bambu Lab PLA Marble White Marble (13103), 1 kg, on a basic reusable spool
• 1 × Desiccant pack
• 1 × Outer packaging box

Download the manufacturer’s PLA Marble technical data sheet