Description
GEPRC TAKER F722 BLS 60A V2 STACK
FEATURES:
- Use mainstream STM32F722 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
- Simple and reasonable installation method, the shock absorber can makethe gyroscope work very stably
- 9V@2.5A + 5V@3A dual independent BEC
SPECIFICATIONS:
FLIGHT CONTROLLER: GEP-F722-HD v2
- MCU:STM32F722
- IMU:ICM42688-P(SPI)
- Air Unit Connection:Direct plugging into DJI Air Unit
- Black Box:16M onboard
- USB Interface:Type-C
- OSD:BetaFlight OSD w/ AT7456E chip
- BEC:5V@3A,9V@2.5A dual BEC
- Firmware Target:GEPRCF722
- Size:36.85×36.85mm, hole 30.5×30.5mm,φ4mm hole becomesφ3mm after using a silicone shock-absorbing circle.
- Input Voltage:3-6S LiPo
- UART:5
- Power Filter:Integrated LC filter
- Weight:8.1g
ESC: TAKER H60_BLS 60A 4IN1 ESC
- Input Voltage: 3-6S Lipo
- Ammeter: Support
- Continue Current:60A
- Burst Current:65A(5 second)
- Support Protocol: Dshot 150/300/600
- Size:42×45.7mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 14.9g
- Target: B_X_30
PACKAGE CONTENTS:
- 1 x Flight Controller
- 1 x ESC
- 1 x Capacitor
- 1 x DJI Air Unit Adapter Cable
- 1 x Flight Controller Adapter Cable
- 1 x XT60 Power cable
- 4 x M3*30 Screws
- 4 x M3*25 Screws
- 8 x Nylon nuts
- 8 x Silicone grommets
- 2 x sh1.0 4pinsilicone cable
- 1 x Camera connection cable
Â
What others are saying
There are no contributions yet.