Description

RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter – Multi-Protocol w/ Hall Gimbals V4.0

The RadioMaster TX16S Mark II Radio Transmitter is the latest in radio transmitter technology. This radio features Hall Gimbals V4.0, with a  Multi-Protocol 4-in1 Internal Module, OpenTX and EdgeTX compatibility, and 2.4GHz radio frequency with 16 Channels. This updated design includes an easily removable battery cover, raised and flat grips for better ergonomics, and improved S1/S2 knobs with center detents. The 4.3″ IPS color dispay provides easy programming with touch panel precison and the  brand new 3.5mm audio headphone jack and built-in dual speakers provide great audio options for pilots!

Is RADIOMASTER TX16s WPC ETA APPROVED ?

Yes,RADIOMASTER TX16S is approved by WPC,We can provide the ETA certificate to government officials if you have project for government,defence agencies.Contact us for ETA CERTIFICATE

THE BEST JUST GOT BETTER.

VIDEO: RadioMaster TX16S Mark II Radio Controller – ELRS | 4IN1

Features

• Improved internal circuitry and optimized power supply.
• New charge circuitry with integrated reverse-polarity protection.
• Optimized charge IC now allows up to 2.2A internal USB-C charge current.
• Rear-mounted audio jack provided headphone output.
• V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
• Optional high/low rear grips are included for improved ergonomics.
• Improved S1/S2 knobs with clear centre-detents.
• Improved LS/RS Sliders with smoother feel and better centre-detents.
• Redesigned battery cover for improved battery access.
• Retooled body shell with improved fit and finish.
• Trainer socket changed to standard TRS 3.5mm socket.
• Rear DIY Socket added for personalized mods.
• Improved internal plastics for better longevity.
• INTERNAL MPM RF MODULE 4in1 versions.

Specification

• Item: TX16S Mark II
• Size: 287x129x184mm
• Weight: 750g (without battery)
• Transmission frequency: 2.400GHz-2.480GHz
• Transmitter module: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)
• Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent)
• SD card: 256MB by default, 8GB maximum
• Antenna gain: 2db (transmit power adjustable)
• Working current: 400mA
• Working voltage: 6.6-8.4v DC
• Remote control distance:> 2km @ 22dbm
• Radio firmware: EdgeTX
• Module Firmware: Multiprotocol- Module (4IN1)
• Channels: Up to 16 channels (depending on the receiver)
• Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
• Gimbal: V4.0 Hall sensor with Aluminium fascia
• Module Bay: JR compatible module bay
• Upgrade method: Supports USB-C online / SD card offline upgrade
• Color : Black
• Mode-2

Includes

• 1x RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter-Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401) w/ Hall Gimbals V4.0 (Black)
• 1x 18650 BatteryTray (Battery Not Included)
• 1x Raised Grips (Set of 2)
• 1x Flat Grips (Set of 2)
• 1x TX16S Key Chain
• 1x Screen Protector
• 1x USB-C Cable

Support EdgeTX and OpenTX

EdgeTX is installed by default (Touch screen enabled).

* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.

INTERNAL MPM 4in1 Versions 

This TX16s MKII comes with Internal MPM 4IN1 RF MODULE.We also have the same TX16S MKII radio with INTERNAL ELRS RF MODULE Module you can buy from here.

Here are the tips for you to choose 4in1 or ELRS, reviews by OscarLiang

“If you can’t decide between ELRS and 4in1,Most people probably go for the ELRS version. It’s going to be the major RC protocol in the near future as it’s so powerful and affordable, with a wide range of tiny and inexpensive ELRS receivers available.

One reason to get the 4in1 is if you only want to use other protocols such as Frsky D8/D16, but these are kind of obsolete and slowly phasing out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1 as you don’t want to have another ELRS module onboard doing nothing. An external ELRS module might have the advantage of higher maximum output power of up to 1W. But honestly the internal module’s 250mW is plenty for FPV pilots, giving you miles of range in ideal conditions.

V4.0 HALL GIMBALS

Standard version with V4.0 Hall Gimbals(already installed on RADIO), same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable

OPTIONAL AG01 GIMBALS(SEPRATE PURCHASE)

AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.You can  upgrade this radio with AG-01 CNC GIMBALS by a seprate purchase.

**NOTE :: THIS PRODUCT DOES NOT COMES WITH AG-01 CNC GIMBALS

Flat & Raised Grips Included

Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.

Built-in dual speakers

External Module Bay

The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.

Easy Firmware Updates

Upgraded Design

• Retooled faceplate with improved fit and finish
• Improved S1/S2 knobs with center detents
• 4.3” IPS Color Display – The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.

• Improved LS/RS Sliders with smoother feel and better center detents.

• New 3.5mm Audio jack – Rear mounted audio jack minimizes RF interference from external modules and adds a headphone audio feature.
• Redesigned battery cover, easier to remove.
• Rear DIY Socket added for personalized mods.

Radio Overview