Description
AOS Cine35 EVO V1.2
Versatile front and rear facing Go Pro mounting.
Quickly adjust between full-ducts/half-ducts/prop guards.
Ultra low vibration for smooth footage (even without stabilisation).
A state-of-the-art tool for Cinematic FPV.
THIS IS AN UPGRADED VERSION WITH PROP GUARD THICKNESS OF 3.0MM(DEFAULT IS 2.0MM).
UPGRADED VERSION WITH ADDITIONAL THICKNESS & CHAMFERED EDGES ON THE GUARDS PROVIDES UNMATCHED FLYING EXPERIENCE WHILE ADDING ROBUSTNESS TO OVERALL FRAME
Key Features
Adjustable Ducts
Ducts do more than just protect the props, they also create aerodynamic drag that is vital for closely following slower moving targets e.g. Skateboarders
For faster targets e.g. BMX the drag from the ducts makes it hard to keep up!
The AOS Cine35 has 3D printable modular ducts that allow the drag to be adjusted. Full ducts are ideal for slower moving targets, half ducts for faster targets and no ducts for minimal drag for the fastest shots.
Versatile Camera Mounting
A Cinewhoop must be a versatile tool for capturing a range of different aerial shots.
With a fully reversible top plate and additional mounting points underneath the AOS Cine35 makes it easy to capture both forward and rear facing shots over the widest range of different camera angles.
All while making sure the frame stays out of view.
Vibration Performance
Vibrations are often a cause of poor image quality with tranditional Cinewhoops. They cause blurry footage as well as wobbles and bobbles that require additional stabilisation to remove in post processing.
The structure of the AOS Cine35 minimises frame resonances to deliver exceptionally clear and smooth footage.
Durability
Most Cinewhoops use injection moulded plastic or 3D printed prop guards. These fragile materials often deform and crack over time potentially jamming up the props and needing replacement.
The AOS Cine35 uses carbon fibre prop guards to maximise stiffness and strength while reducing weight.
Technical Specs
-
Designed for 3.5 inch props, no props in view.
-
4 mm Truss Arms
-
Up to three 25.5 or 20 mm stacks (front, center and rear)
-
One 30.5mm stack (center)
-
32x32mm GoPro mounting holes in top plate with installed press-nuts
-
XT60 pass through top plate
-
Captive battery strap slots for lengthwise or toilet tank mounting
-
Fits 19-20mm FPV cameras including DJI O3
-
Recommended motor size 2004
-
9×9 up to 12x12mm motor mounting
-
Standoffs, carbon and hardware included
PACKAGE CONTENTS:
- 1 * AOS Cine35 EVO V1.2 FRAME KIT
AOS Cine35 V1.2 Outline Diagram
AOS Cine35 V1.2 Exploded Diagram
DM US ON +91-9819030753 IF YOU WANT 3D PRINTS TO BE INCLUDED IN YOUR ORDER(CHARGES DEPENDS ON WHICH 3D PART & QTY)
3D Prints
What others are saying
There are no contributions yet.